The MEGA GLATT material shall be used on the surface of brick masonry, concrete, continuous concrete etc not needing in any additional material and having a high level of adhesiveness. It balances the level of humidity indoors, provides with heat insulation, and spreads evenly. One of the composing components is water which makes material not too easy to flame if a fire takes place. Before using the plaster, the surfice is required to be cleaned from various impurities. Dry and hot surfaces are required moistured . The dry mix should be placed into a vesel filled with water, thoroughly mixing with water (preferably with a mixer) until you get a uniform mass, after which let the mixture stay untouched for 2-3 minutes. The prepared mixtute must be used within one hour. The mixture is to be applied on walls with a layer of 2-35 mm, and on the ceiling --- 2-15 mm. Dilution with water: 6-6.5 l. per 10 kg of mixture; Temperature of application: +5° С up to +35° С; Time in use: 1 hour; The area to be covered: layer of 1 cm - 10 kg/m2; Drying time: 120-150 min Hardness of the surface: 40 Shore D Before applying the product, read attentively the instruction on the package.