The cement-based ready-to-use joint filler has a high degree of adhesion due to polymer additives. It is a practical and simple in use homogeneous facing material. The plaster (filler) is applied as a covering under painting or facing, on inner and outer walls covered with cement mortal, concrete, on briquette and brick walls or on earlier painted smooth surfaces. After application it forms a smooth surface. Does not penetrate water, does not loose color, does not crack and it is not falling down. Before product application the surface is to be necessarily cleaned from different sorts of impurities. The mix is necessary to be diluted with water and carefully mixed by a mixer before a homogeneous mass is obtained. In 10 minutes the solution should be mixed once more and then it is ready for application. Put the mix only on dry and not hot surface. Dilution with water: 4-6 liters per 20 kg of the mixture; Temperature of application: +5° С up to +35 °С; Time in use: 1 hour; The area to be covered: the layer of 1 mm- 1-1.3 kg/m2; Hardness of the surface: 1.5 MPa; Before applying, read attentively the instruction on the package.