Quality guarantee throughout
the entire service life.
Dry mortar is based on gypsum, made in accordance with ГОСТ 31377-2008. It intends for interior works: for alignment and plastering stone, brick, plaster, concrete, monolithic concrete, etc. walls. The layer thickness should be from 2 sm till 13 sm. It possesses the high adhesive characteristic. It does not flow and clot. The air flow properties provide the balance the humidity level in the room. It makes available for the thermal insulation. It has energy-saving and fire-prevention characteristics.
Water ratio: 4,5-5,5 liters of water per 10 kg of the dry mix.
Application time: not less than 60 minutes.
Drying time: 24 hours.
Application area: 10 kg /m2, at 1 sm thickness of layer.
The compression strength: 2,0 MPa.
Adhesion strength with the base: 0,3 MPa.
Necessary temperature of working environment: +5°С/+35°С.
In three-layer moisture resistant kraft bags: 25 kg. or polypropylene bags: 30 kg.
Republic of Uzbekistan, Tashkent,
Prospect Bunyodkor, 57B.
Phone: (99871) 279-26-00
Fax: (99871) 279-89-79