Home - Catalogue of products - Dry Mixes - Satin-2


Net weight



Dry construction dispersive putty made on plaster, with various additives manufactured in accordance with ГОСТ 31387-2008. It was intended for alignment of stone, brick, plaster and other surfaces in the carrying out the internal work at the construction, repair and reconstruction of buildings and structures. Putty mixture may also be used as a basis for subsequent application of the decorative coatings (paints, etc.) Easy to apply, smoothed and polished.It has good adhesion to concrete and gypsum cardboards. No clots by applying subsequent layers and no cracks when drying. It creates the flat and smooth surface for coloring and wallpapering. The air flow features balances the humidity level. It is very light and provides insulation.  It is fire-prevention characteristics.


Water ratio: 5,6 liter per 10 kg of the mixture.
Term of setting: 8-10 hours.
The area of application: 1 kg / m2, at the thickness of layer of 1 мм.
The compression strength not less than: 2,0 MPa.
Adhesion strength with the base at least: 0,3 MPa.
Necessary temperature of working environment: +5°С/+35°С.

In three-layer moisture resistant kraft bags: 20 kg.


The Dow Chemical Company
Esen Mikronize Maden San. ve Tic. A.Ş.
Tronox Incorporated
4Hercules Chemical Company, Inc.
Excellence is our passion
Fabbri Group Italia
Shin-Etsu Group


Republic of Uzbekistan, Tashkent,
Prospect Bunyodkor, 57B.

Phone: (99871) 279-26-00
Fax: (99871) 279-89-79